Anycubic PLA Silk Dual Filament 1kg - Black/Purple

Dual-colour gradient silk finish | Smooth, high-lustre surface | Compatible with 1.75 mm FDM printers | Printable at 50–250 mm/s | Intelligent identification supported

The Anycubic PLA Silk Dual Filament in Black/Purple is designed for makers, artists, and hobbyists who want their prints to do more than just hold a shape. The dual-colour gradient construction blends deep black and rich purple into a seamlessly shifting, silk-like finish that catches the light differently from every angle — ideal for decorative parts, fan art, figurines, and display pieces. By adjusting nozzle temperature and print speed within the recommended 210–240 °C and 50–250 mm/s ranges, you can dial the surface gloss up or down to suit the look you're after. The filament supports intelligent identification when paired with compatible Anycubic printers, streamlining setup automatically. For best results, dry the filament at 55–65 °C for 6–8 hours before printing, and use a nozzle of 0.4 mm or larger. A reliable, visually striking material for FDM prints that deserve a premium finish.

Features

• Dual-colour gradient blends black and purple for a rich, layered visual effect
• Silk-like lustre that shifts with viewing angle, giving prints a premium aesthetic
• Adjustable surface gloss — tune temperature and speed to control sheen level
• Compatible with all 1.75 mm FDM printers; no special hardware required
• Supports intelligent identification on compatible Anycubic printers for seamless setup
• Recommended for decorative parts, fan art, figurines, and display models
• Certified to RoHS, REACH, and SDS standards

Specifications

• Colour: Black Purple (#212721,#7249C7)
• Dry Out Before Use_ Recommended
• Drying Condition_ 55-65℃, 6-8h
• ACE Compatibility_ Compatible
• Nozzle Size_ Recommended 0.4 mm or above
• Printing Temperature_ 210-240 ℃
• Heated Bed Temperature_ 55-56 ℃
• Recommended Printing Speed_ 50-250 mm/s
• Maximum Volume Speed (Flow Rate): 8 mm³/s
• Density: 1.22 g/cm³
• Melt Index_ 9±1 g/10 min (190℃/2.16kg)
• Melting Point Temperature_ 164 ℃
• Vicat Softening Temperature_ 54 ℃
• Heat Deflection Temperature (0.45MPa): 53 ℃
• Young's Modulus_ 2000±200 MPa
• Tensile Strength_ 37±4 MPa
• Elongation at Break_ 28±5%
• Bending Modulus_ 2400±160 MPa
• Bending Strength_ 66±4 MPa
• lzod lmpact Strength (X-Y): 20±2 kJ/m²
• Tensile Strength (Z): 12±4 MPa
• Filament Type_ Aesthetic filaments
• Recommend to Print_ Decorative parts, fandom, artworks
• Intelligent Identification_ Supported
• Reusable Filament Spool_ Supported
• Size: 1KG

What's in the Box

• Anycubic PLA Silk Dual Filament 1kg - Black/Purple x1